Wednesday, March 10, 2010

Lacy Stitch for Spring Twilight Pullover

Both of my patterns Spring Twilight Pullover from Interweave Knits, Spring 2010 and Lacy scarf from Casual, Elegant Knits use lacy stitch pattern. I made the video in case you have any difficulty with the stitch. I hope this helps.
video

Wednesday, December 9, 2009

Making a perfect selvage stitch edge

I want to share with you this very important (for many reasons) technique that makes your knitting edges perfect.
Let's look at these pictures first.

This one shows two swatches worked in Garter Stitch (knit all sts).











Can you see how different the edges are? The left swatch does not have the selvage stitch. The right one does.

Here is another view of the same swatches.














The right side has a very even edge which makes a good finish. It is as important for a scarf as for a detail of a sweater. When you need to sew pieces together, it is so much nicer to work with these straight edges, not knots. Having said this, I want to mention that sometimes the left side is a choice in the pattern if it complements the whole look of a project.

There are a few ways how to obtain this straight edge. I make it simple for myself.
Here is what I do. If the pattern does not include selvage stitches, I add 2 sts to the stitch count.
I ALWAYS slip the first st purlwise with yarn in front like in this picture:














The stitch will be on your right needle.


Work the rest of sts in pattern to the last one. This time you will knit all sts, but it could be a very complicated pattern instead.

ALWAYS knit the last stitch through the back loop like this.
Repeat every row: Slip the first st with yarn in front and knit the last st tbl (through back loop). The result is the nice edge you see in the first two photos.








Saturday, November 21, 2009

Every great sweater begins with the great swatch.

I know that some people think that to knit a swatch is a chore, nuisance, or even some ancient thing that nobody needs since the pattern tells you how many stitches you need to cast on. Well, how about if I give you some scenarios what happened to “Martha” and you decide if making a swatch is worth her time. (Sorry, cannot help myself. My teaching techniques coming through:))

Scenario #1: The usual.
Martha has a pattern for a nice sweater. She got the exact yarn that was used in the pattern, the right size of needles, and all other materials. She is set to knit. It is going to be her favorite sweater. Martha is very excited and cannot wait to start. She thinks: “What size do I choose from this pattern? I think it has to be M (medium) since I always buy clothes of that size at the store.” The pattern tells her to cast on a certain number of stitches and follow step-by-step instructions. We do not see Martha for some time. Next time we see her we are very concerned. She looks upset. She tells us that she chose the wrong pattern. She says: “ It is a bad pattern. I followed the instructions and my sweater came out too small around and too short. I wasted the time, the yarn, and I have no sweater.”

Any thoughts on what went wrong?
Scenario # 2. Somewhat frequent
Martha has a beautiful yarn in her stash. She wants to use it for a sweater pattern she just bought. Martha told her friend (an advanced knitter): “I do not think it is a big difference in the yarn. I will be fine. It looks the same to me. I am going to start it tonight. I have the needles that pattern calls for.”

What do you think her friend said to her?

Scenario #3. Periodic
Martha learned the hard way that she has to start her project with a gauge swatch. She confesses: “I always skipped that part in the introduction of a pattern. This is the first time I knitted my swatch. The gauge in the pattern is 5 sts = 1 in and I am very happy to report that mine is VERY close. It is 4.5 sts = 1 in. I got it the first time. Yay! I am all set.”

Is Martha going to have a well-fitted sweater?

Answers to
Scenario #1: She did not knit a gauge swatch and she did not measure herself or a well-fitted sweater.

Scenario #2: You have to knit a gauge swatch. Even different colors of the same yarn can give you a different gauge on the same needles.

Scenario #3: No, she did not get her gauge. If she did a little math…
Let’s do it for her.
Her gauge is 4.5 sts = 1 in
Patt gauge is 5.0 sts = 1 in
Sweater measures 40 in at the hip
With her gauge: 40 in x 4.5 sts per in = 180 sts needed for CO
With the patt gauge: 40 in x 5 sts per in = 200 sts needed for CO (that is the number she sees in the instructions)

The difference is: 200 sts – 180 sts = 20 sts around the hip area.
In inches it will be (with her gauge) 20 sts / 4.5 sts = 4.44 in (that how much she is adding to the circumference of hips).
My opinion: She is NOT going to be happy with this sweater.

Solution: Martha needs to make another swatch with needles of the next size down. Hopefully this will bring her to the right gauge.

Is this convincing enough? There are many more scenarios that lead to the same conclusion: If we want not to waste our precious time, beautiful yarn, and be very happy and satisfied with the result, WE MUST KNIT A GAUGE SWATCH.

The Facts

  • The number of sts (often with decimals) packed into one inch or cm is called the "knitting gauge". It shows the density of obtained fabric. A fingering weight yarn packs more sts in one inch than worsted, bulky, or chunky weight can. In other words, the more stitches you have that make 1 inch length, the thinner your yarn is.
  • The yarn label gives you suggested gauge and needle size.
  • The yarn label gives you gauge after blocking.
  • The dye changes the gauge. Even the same color of the same brand, but different dye lot can produce different gauge.
  • The gauge is effected by the way we hold needles, by the knitting method we use (I have different gauges when I knit using Continental or English methods), by stress level (Do not continue knitting an important big project when your stress level is suddenly very high. You will see the difference. You can start a new project instead.), and many other factors.
  • A designer uses her/his gauge to write the pattern. You are responsible for getting as close as you can to that stitch and row gauge. Only then you can be sure that your finished product will look like you see it on the model.


Do The Right Thing

  • Take your time. Make a good-size swatch. I recommend the size of not less than 6x6 inches. It pays off.
  • Use the yarn intended for the project.
  • Start with suggested needles.
  • Knit the swatch for the main stitch pattern (not always Stockinette Stitch) using appropriate needle size.
  • If there are a few stitch patterns in the main body, make a swatch for each.
  • Follow (if you wish) this example.
  • Study the stitch pattern. You can choose any pattern you wish instead. My pattern has a multiple of 8 sts. I wanted to see at least 5 repeats, so I can comprehend the look of a garment.
  • Cast on enough sts for 5 repeats plus 4 or 5 sts for a border. I have 48 sts.
  • Begin with a few rows of Garter stitch for stability of fabric.
  • Follow with the main pattern for about 4 or 5 rows. Keep 4 or 5 sts on each side in Garter stitch.
  • Take a tapestry needle with some contrasting thread or yarn (the length is about a yard).
  • Next right side row: with that thread mark about 10th st from the right edge (stitches at the very edge can be distorted), mark every 5th st after that until you have about 10 sts left. Leave enough thread on the first and the last marked stitches to go up and across the last row. The thread is going to hang for now.
  • Knit 10 rows following the set pattern.
  • Mark the first and the last stitches only.
  • Repeat last two steps 2-4 times.
  • Mark across the last row every 5th stitch as you did on the first marked row. You will form a rectangle. Pull marking thread a little, so it is straight, but not disturbing the fabric.

In my swatch I marked 30 sts and 30 rows.
  • Continue for a few rows in pattern and finish with 4-5 rows of Garter stitch. Bind off.
You do not have to cut the yarn off, if you think you are limited with yarn. At the end the yarn from this gauge can be used for seaming and other things. Just secure the last stitch by going with the ball through the loop.
  • Block the swatch. “The rule of a Thumb”: treat this swatch in exact way you are going to treat your finished garment. I used steam to block it. I am very careful with stitches in the middle. I never touch them even with the professional steamer plastic head. I can touch the edges to make them flat. I do flatten the middle with my hand lightly.
  • Let the swatch rest and cool. Leave it be for a few hours.
  • Measure a few times across .




























and a few times vertically. Usually there is a little difference in measurements.






















Write them down and take an average for each direction.
  • Divide the number of stitches by number of inches (decimals included to two places) and number of rows by number of inches (decimals included to two places). In my swatch I had : 30 sts = 5 in (no decimals, my luck). My stitch gauge is 30/5=6 sts in one inch 30 rows = 4.19 inch (3/16 of an inch =0.19). My row gauge is 30/4.19 = 7.4 rows If I followed the pattern that said 4.5 sts = 1 in, I will change the needle size to the next up to pack less sts in one inch. The row gauge is harder to manage. If I got the exact stitch gauge and my row gauge is a little off, I will more likely rely on my measuring tape to get me where I am. I am sure in this case the difference is minimal.
You are done. Start your project.

I hope this helps you to overcome that negative feeling about making the swatch. In fact, I hope that you will love making it from now on. Think about it. It gives you the confidence that you are not going to end up with a different size of your garment and you can check if the yarn and the pattern look to your liking. There is another benefit in case of a difficult stitch pattern- you are learning it as you are working on the gauge.

If you want to read more about the gauge swatch, there are many different articles on this topic. There are two that I see on Knitty.com
1. By Jenna Wilson.
2. By Marilyn A Roberts.

Wednesday, September 23, 2009

DEWDROP CAST ON

I use this cast-on method in many of my designs. I hope you like it as much as I do.

video

HELP WITH SWEET HONEY BERET. BRIOCHE STITCH THAT IS USED IS CALLED HONEYCOMB STITCH.

This video demonstrates the most difficult part of Honeycomb Stitch (in the round) that was used in this beret. Only two rounds are shown. You should not have any problems with other rounds. This pattern can be found in the Winter 2008 issue of Interweave Knits.


video